Tel: +86-512-53206123
E-mail: shimon_xu@ysjypack.com
Item :Aluminum Foil Laminated Bubble
Structure: AL+PE+(Double)Bubble+PE+AL
Thickness: 2-4cm
Reflectivity:96%-97%
Permeability:0.025gsm/KPA
Color:Silver,White, Etc
Width:1-1.5M
Machine Direction(MD):150N/25mm
Roll Length:Personalized...
The product has good fracture resistance and strength. It is a good thermal insulation material for building roofs and wall surfaces, and can also be used in many thermal insulation fields such as container lining insulation. This material is commonly used as insulation for...
Foil Backed Insulation is the best type of insulation for retaining heat in the winter and keeping heat out in the summer. This insulation product is designed to slow heat transfer and enhance acoustical performance. It also works as a barrier for methane, radon, vapor,...
● Heat insulation and waterproof ● Waterproof & Moisture-proof ● Easy cutting ● Anti-rust ● Oxygen isolation
AL foil insulation:In the general sense, the aluminum strip with thickness less than or equal to 0.2 mm formed by rolling aluminum or aluminum alloy strip is called aluminum foil. Aluminum foil has its own reflection and radiation effect, and woven fabric has its own tear...
Sliver Paper:The main structural component of the product is composed of aluminum foil, woven cloth and aluminum foil.
Name:Aluminum Foil Woven Fabric
Weight:95 g/sqm
Structure:AL+PE+ Woven Fabric
Width (M):1-1.8M
Length (M):Personalized Customization
Permeability:0.015gsm/KPA
Name:Aluminum Foil Woven Fabric
Weight:95 g/sqm
Structure:AL+PE+ Woven Fabric
Width (M):1-1.8M
Length (M):Personalized Customization
Permeability:0.015gsm/KPA
Name: Aluminum Foil Woven Fabric
Weight: 95 g/sqm
Structure: AL+PE+ Woven Fabric
Width (M): 1-1.8M
Length (M): Personalized Customization
Permeability: 0.015gsm/KPA
Name: Double Sided Aluminum Foil Woven Fabric
Weight: 130 g/sqm
Structure: AL + PE + Woven Fabric + PE + AL
Width (M): 1-1.8M
Length (M): Personalized Customization
Permeability: 0.015gsm/KPA
Name: Aluminum Foil Woven Fabric Laminated Aluminum Film
Weight: 130g/Sqm
Structure: AL+PE+Woven Fabric+PE+VMPET
Width (M): 1-1.5M
Length (M): Personalized Customization
Permeability: 0.025gsm/KPA
Name: Dry Aluminum Foil Woven fabric Laminated Aluminum Film
Weight: 150 g/sqm
Structure: PET+ AL+ PE+ Woven Fabric+ PE+ VMPET
Width (M): 1-1.5M
Length (M): Personalized Customization
Permeability: 0.025gsm/KPA
About the Product: This is the Double Bubble (Twice as thick as normal Single Bubble) One Side has a Foil Finish The other side has a White Vinyl finish Some of the pictures in this listing show the...
Reflective insulation, also known as foil insulation, is a material with reflective facing. In most cases, this is aluminum foil or aluminized polyester. This type of insulation reflects heat by up...
Foil-bubble-bubble-foil; The R-value is dependent upon the type of application used; generally, the following values are a good; guideline: R value is roughly 5.3 when used in a floor; R value is...
Some of the better manufactures state in fine print (When you can find it) the conductive R value of their products. Most metallic bubble wraps are about an R-1. Worth mentioning, to get the...
Built by ESD consultants Low Impact Development (LID) Consulting in Melbourne Australia the R value calculator is a practical tool to simplify total insulation calculations. Our insulation calculator...
However, cellulose is costly and can lose its efficiency over time, leading to a decrease in its average R-value of 3.2 per inch. Spray Foam Insulation. If you plan to use your garage as a living...